ds15003 rev. c-3 1 of 2 FR1A-fr1m FR1A - fr1m glass passivated fast recovery rectifier features maximum ratings and electrical characteristics notes: 1. reverse recovery test conditions: i f = 0.5a, i r = 1a, i rr = 0.25a 2. thermal resistance from junction to lead with 6.0mm 2 copper pads 3. measured at 1.0mhz and applied reverse voltage of 4.0v a b c d g h e j smb - do-214aa dim min max a 3.30 3.94 b 4.00 4.65 c 1.95 2.21 d 0.15 0.40 e 5.00 6.00 g 0.10 0.20 h 0.76 1.52 j 2.00 2.62 all dimensions in mm ratings at 25 c ambient temperature unless otherwise specified. single phase, half wave, 60hz resistive or inductive load. for surface mounted applications high temperature metallurgically bonded contacts capable of meeting environmental standards of mil-std-19500 plastic material - ul flammability classification 94v-0 high reliability submersible temperature of 265 c for 10 seconds in solder bath glass passivated junction case: smb, molded plastic terminals: solderable per mil-std-202, method 208 polarity: cathode band approx. weight: 0.093 grams mounting position: any mechanical data characteristic unit FR1A fr1b fr1d fr1g fr1j fr1k fr1m unit maximum recurrent peak reverse voltage v rrm 50 100 200 400 600 800 1000 v maximum rms voltage v rms 35 70 140 280 420 560 700 v maximum dc blocking voltage v dc 50 100 200 400 600 800 1000 v maximum average forward rectified current @ t a = 75 c i (av) 1.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (jedec method) i fsm 30 a maximum instantaneous forward voltage at 1.0 a v f 1.3 v maximum dc reverse current at rated @ t a =25 c dc blocking voltage @ t a = 125 c i r 5.0 100 a maximum full load reverse current full cycle average @ t a = 75 c 50 a maximum reverse recovery time (see note 1) t rr 150 250 500 500 ns maximumthermal resistance (see note 2) r jl 30 c/w typical junction capacitance (see note 3) c j 15 pf operating and storage temperature rating t j ,t stg -65 to +175 c
ds15003 rev. c-3 2 of 2 FR1A-fr1m 0 2 4 6 8 10 20 40 60 80 100 120 140 160 180 i , average o utput current (amperes) (av) t , ambient temperature (c) fig. 1, forward current derating curve a single phase half wave 60hz resistive or inductive load 9.5mm lead lengths 1 10 100 5 10 15 20 25 30 number of cycles @ 60hz fig. 4, max non-repetitive peak forward surge curren t i , peak f o r ward surge current (amperes) f 8.3ms single half sine-wave jedec method 1 10 100 100 10 1 v , reverse voltage (volts) fig. 3, forward current derating curve r cj, juncti o n cap acitance (pf) tj = 25oc 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.1 1.0 4.0 v , instantaneous forward voltage (volts) fi g .2, t y pical forward characteristics f i , instantaneous for ward current (amperes) f tj = 25oc pulse width = 300ms 2% duty cycle
|
